News Release
Method of Removing Burrs on Hardware Stamping Parts
Source:
Release time: 2023.05.10
Many hardware processing factories often encounter burrs in the production of hardware stamping products. So, let's introduce how to remove burrs from hardware stamping parts.
There are tools to remove burrs from hardware stamping parts
1. Hole: Use a chamfer cutter or a larger diameter drill bit at the front end
2. Edge: use file, oilstone, sandpaper, sharpening stone,
3. Welding slag: With vibration, welding slag removal tools can also remove brittle burrs
4. Outer diameter: During the machining process, the lathe is used to guide the angle
5. There are also polishing, grinding, sandblasting, depending on the workpiece and product requirements
The process of removing burrs from hardware stamping parts should be determined based on the product. If it is a single product, it can be manually removed
1. Use electrochemical deburring. If self-made equipment, the cost is not high, economical, efficient, and usable.
2. Vibration grinding removes burrs (gear burrs), with high efficiency and acceptable quality.
3. Heat treated parts can also be deburred by shot peening and surface stress can be eliminated
4. Using an air gun with various shapes of gun heads for deburring is more effective and efficient
5. The following methods can be used for gear deburring: 1. Electrolytic deburring has the highest efficiency and best quality, but the equipment cost is too high for ordinary small enterprises to afford; 2. Vibration deburring, with average quality but lower cost, 3. Manual deburring, with better quality but possibly lower efficiency; 4. Rolling can be used. Stainless steel welding rod
6. Pneumatic deburring
There are tools to remove burrs from hardware stamping parts
1. Hole: Use a chamfer cutter or a larger diameter drill bit at the front end
2. Edge: use file, oilstone, sandpaper, sharpening stone,
3. Welding slag: With vibration, welding slag removal tools can also remove brittle burrs
4. Outer diameter: During the machining process, the lathe is used to guide the angle
5. There are also polishing, grinding, sandblasting, depending on the workpiece and product requirements
The process of removing burrs from hardware stamping parts should be determined based on the product. If it is a single product, it can be manually removed
1. Use electrochemical deburring. If self-made equipment, the cost is not high, economical, efficient, and usable.
2. Vibration grinding removes burrs (gear burrs), with high efficiency and acceptable quality.
3. Heat treated parts can also be deburred by shot peening and surface stress can be eliminated
4. Using an air gun with various shapes of gun heads for deburring is more effective and efficient
5. The following methods can be used for gear deburring: 1. Electrolytic deburring has the highest efficiency and best quality, but the equipment cost is too high for ordinary small enterprises to afford; 2. Vibration deburring, with average quality but lower cost, 3. Manual deburring, with better quality but possibly lower efficiency; 4. Rolling can be used. Stainless steel welding rod
6. Pneumatic deburring